An emergency shower solution for when a constant water supply or adequate water pressure is unavailable.
Supported on a 40mm x 40mm x 3mm hot dip galvanised (provides corrosion protection) carbon steel, square tubular frame with bolt down fixing brackets, the moulded polyethylene 1250ltr water tank is covered in 40mm reflective Kingspan Thermapitch® TP10 rigid polyurethane foam, insulation board (0.022W/m.k thermal conductivity) and the tank structure is further protected by a shroud complete with warning signage. The heating element sits in a sump to ensure it is covered at all times, even if the tank is completely empty and the system is fitted with a test activation handle which is accessed from outside the shower area.
||1320mm x 1430mm x 3600mm H (overall height)
||470kg when empty & 1,775kg when full
||2.25” BSP connection - 230v 3kw rated, wired to a rotary isolation switch
||Needs to be fitted with an optional electric pump to ensure compliance with the ANSI Z358.1 flow standard of 75.7lpm over 15 minutes duration
|| Full stainless steel construction
||Manufactured from non-ferrous materials
Full width bar across the rear of the unit which also extends beyond the framework for remote & test activation.
Visual water level indicator: Fitted on front face of tank shroud
Download a datasheet for SE-VTS-2